Roof Decking in Quebec: Plywood vs OSB and When to Replace It

Written by

in

Roof decking (also called sheathing) is the layer of plywood, OSB or wooden planks that your shingles are nailed to. During a roof replacement in Quebec, it should be inspected sheet by sheet and replaced wherever it is soft, rotten, delaminated or too thin to hold nails. Because nobody can see the full condition of the deck before the old roof comes off, a good quote states a clear unit price per sheet for any replacement.

Most homeowners focus on the visible part of a roof: shingle colour, metal profile, gutters. Yet the decking is what holds everything together. A brand-new roof installed on weak or damaged sheathing can buckle, leak around nails or fail prematurely. This guide explains the types of roof decking, the signs that it needs replacing, how roofers handle it during a tear-off and how to avoid surprises on the final invoice.

What does roof decking do?

The deck spans between the rafters or trusses and provides a continuous, solid surface for the roofing system. It has several jobs:

  • giving shingle nails something solid to grip;
  • distributing snow loads and the weight of workers between rafters;
  • stiffening the roof structure against wind;
  • providing a flat, clean surface for ice-and-water membrane and underlayment.

When the deck is compromised, shingles can lift in the wind, nails can back out, membranes may not adhere properly and the roof surface can sag between rafters.

Types of roof decking found in Quebec homes

Plank (board) sheathing

Older homes and cottages, including many in the Laurentides built before the 1970s, often have wooden boards nailed across the rafters. Boards can be solid and durable, but gaps between them, knots, splits and cupped boards can create problems for modern shingles. Some homes even have spaced boards originally designed for cedar shakes. When converting such a roof to asphalt shingles, a solid sheathing layer is usually required.

Plywood

Plywood is made of thin wood veneers glued in alternating directions. It is strong, holds nails well and tolerates occasional moisture relatively well. It was common in Quebec homes from the 1960s to the 1990s and remains a popular choice.

OSB (oriented strand board)

OSB is made of wood strands bonded with resin. It is now the most common roof sheathing in new construction because of its consistent quality and lower cost. OSB performs well when kept dry, but its edges can swell if they are repeatedly wetted, for example by a chronic leak or attic condensation.

Plywood vs OSB: which is better?

Both products are accepted by building codes when the right thickness and grade are used and they are installed correctly. In practice:

  • Plywood generally dries out faster after getting wet and may be preferred where moisture is a concern.
  • OSB is more uniform from sheet to sheet and is usually less expensive.

The choice matters less than proper thickness, correct spacing between panels, adequate nailing and, above all, good attic ventilation to keep the deck dry. Our guide to roof and attic ventilation (in French) explains why.

Thickness and installation details

The required panel thickness depends on rafter or truss spacing, the expected loads and the code in force. Many homes with trusses at 24 inches on centre use panels in the 7/16-inch to 1/2-inch range, often with H-clips between rafters to support panel edges, while thicker panels may be specified for greater spans or heavier roofing. Your roofer should match the existing thickness where sheets are replaced, or follow the requirements for your structure if the whole deck is being redone.

Good installation practices include:

  • leaving a small gap between panels to allow for expansion (manufacturers typically specify about 1/8 inch);
  • staggering the joints from one row to the next;
  • using H-clips or blocking where required between supports;
  • nailing at the spacing recommended by the panel manufacturer and code;
  • making sure panel edges land on rafters or trusses.

Signs your roof decking needs replacing

Visible from the attic

  • dark staining, black mould spots or water marks on the underside of the deck;
  • delaminated plywood (layers separating) or swollen OSB edges;
  • rusty nails or frost on nail tips in winter, a sign of excessive moisture;
  • daylight visible through the deck where it should not be;
  • sagging between rafters.

Our article on attic frost (in French) explains how condensation slowly damages the deck from below.

Visible from outside

  • a wavy or sagging roof line between rafters;
  • soft or spongy areas reported by a roofer or inspector;
  • repeated leaks in the same area, especially at the eaves (often from ice dams) or around chimneys and skylights.

Discovered during tear-off

The most common moment to discover deck damage is when the old shingles come off. Areas around chimneys, along the eaves, in valleys, around plumbing vents and below skylights are the usual suspects. Our articles on ice dams and chimney flashing leaks (in French) describe how these zones get damaged.

Partial replacement or full re-decking?

Most roof replacements need only a few sheets of decking replaced. Full re-decking is usually justified when:

  • the deck is old plank sheathing with wide gaps or many damaged boards;
  • widespread delamination or swelling is found;
  • chronic attic condensation has affected large areas;
  • the existing deck is too thin for the planned roofing or loads;
  • the roof has been overlaid several times and the deck has deteriorated under multiple layers.

In some cases, roofers install new sheathing over old plank boards instead of removing them. This can work when the boards are sound and well attached, but the approach should be explained in the quote.

Avoiding surprises: how decking appears in a roofing quote

Because the roofer cannot see the deck before tear-off, most quotes treat decking separately. Here is what a clear quote should include:

  • A unit price per sheet (for example per 4 x 8 sheet installed), including material and labour.
  • The type and thickness of the replacement panels.
  • Whether a number of sheets is included in the base price, and what happens beyond that number.
  • A commitment to show you the damage (photos or a visit) before replacing more than a certain amount.
  • The unit price for board replacement if your home has plank sheathing.

Comparing quotes without these details can be misleading: a low base price may come with an expensive per-sheet rate. Our roofing quote comparison guide (in French) shows how to line up these items. You can also review what to expect during the work in Roof Replacement Process: What to Expect.

Why shingling over hides deck problems

An overlay (new shingles installed over old ones) makes it impossible to inspect or repair the deck. Rotten areas remain in place, and new nails may not hold properly in weakened wood. This is one of the main reasons most roofers recommend a full tear-off in Quebec’s climate.

Keeping your decking healthy for decades

The deck can outlast several roof coverings if it stays dry. The main enemies are leaks and condensation. To protect it:

  • Ventilate the attic: balanced intake (soffits) and exhaust (ridge or roof vents) help remove moisture.
  • Air-seal the ceiling: warm, humid air escaping from the house through light fixtures, attic hatches and plumbing chases is a major source of attic condensation.
  • Insulate properly: adequate attic insulation reduces heat loss that causes ice dams. See attic insulation R-value in Quebec (in French).
  • Vent bathroom and kitchen fans outdoors, never into the attic.
  • Fix leaks quickly: a small leak left for a season can rot several sheets.
  • Inspect the attic at least once a year, ideally in late winter when condensation problems are most visible.

Special cases: cottages, flat sections and cathedral ceilings

Some building types common in the Laurentides call for extra attention to the deck.

  • Seasonal cottages: a cottage that is heated only occasionally can experience large swings in attic humidity. When the building warms up after a cold period, moisture can condense on the cold underside of the deck. Owners who use their cottage in winter should have the attic checked regularly for frost and staining.
  • Cathedral ceilings: when the ceiling follows the roof slope, there is no attic to inspect. The space between insulation and deck must be ventilated, or the assembly must be designed as an unvented roof with the appropriate insulation strategy. Deck damage in these roofs is often discovered only at tear-off, so the unit price per sheet is especially important in the quote.
  • Low-slope sections and porches: transitions between a pitched roof and a low-slope section are frequent leak points. The deck under these transitions should be checked carefully, and the low-slope area needs a membrane system suited to its pitch.
  • Additions: when an addition was built at a different time from the main house, the two decks may have different thicknesses or materials. The roofer should level the transition so the new roofing lies flat.

Decking and insurance

Home insurance policies generally distinguish between sudden, accidental damage and gradual deterioration. Rot caused by a long-term leak or condensation is often considered wear or lack of maintenance. Coverage varies widely, so check your own policy. Our French article on roofing and home insurance in Quebec explains the general principles.

Hiring the right contractor

Decking replacement is part of roofing work and should be done by a contractor holding a valid licence from the Régie du bâtiment du Québec. If structural problems are found (broken rafters, sagging trusses), a carpenter or a structural engineer may need to be involved. Read How to Choose a Roofer in Quebec for a full checklist, then request free roofing quotes in the Laurentides.

Frequently asked questions

How do roofers know if decking needs replacing?

They look for soft spots when walking the deck, visible rot, delamination, swelling and nails that do not hold. Much of this is only visible once the old shingles are removed.

Is OSB acceptable for roof decking in Quebec?

Yes. OSB is widely used and accepted when the correct thickness and grade are installed properly. Keeping the attic well ventilated is key to its long-term performance.

Should I replace all the decking during a roof replacement?

Not necessarily. Most roofs need only a few sheets replaced. Full re-decking is usually reserved for old plank sheathing, widespread damage or decks that are too thin.

Why is decking billed separately?

Because its condition cannot be fully known before tear-off. A unit price per sheet lets you understand the potential extra cost in advance.

Can I see the damaged decking before it is replaced?

You can ask for it. Many roofers will take photos or show you the damaged area before replacing it. Include this request in your contract.

What causes roof decking to rot?

Leaks around flashing and penetrations, ice-dam water at the eaves, and attic condensation caused by poor ventilation and air leaks from the house are the most common causes.

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *